Quick Skive Removal Tools
Remove ProSeal®, gap fillers, antenna gaskets, and coatings with no damage to metal or composite substrates
EVC’s Quick Skive Removal Tools consist of various hand tools and power tools with ergonomically designed handles, nonmetallic blades, gap blades, and gap bits. The special blade/bit designs are for removing materials from fragile composite and other topcoat/primer/anodized scratch-prone surfaces during maintenance activities. These activities include aircraft fuselages and components during on- and off-aircraft, missile system and ground vehicle maintenance.
The Quick Skive Removal Kit allows for outstanding results when “worker-friendly” heat or non-heat skive processes are used. The heat process does not damage the skive blades when directing a heat gun or other heat source on the targeted surface, then skiving off the heated materials.
Benefits
- Reduces total maintenance hours
- Prevents costs by eliminating maintenance-induced damage
- Removes materials from surfaces including composite and other fragile, scratch-prone surfaces
- “Worker-friendly” heat or non-heat skive processes
- Simple one-person ergonomic operation
- Avoids damage to topcoat base primer, substrate, or metal treatment
- Prevents environmental secondary waste.
- Eliminates dust residue
- Quick Skive Removal Tools improve efficiency for depot (Phase Maintenance PM1 and PM2), intermediate level, and unit level maintenance.
- Approved for use on U.S. Air Force (USAF), U.S. Army (USA) and U.S. Navy (USN) active, guard, and reserves aviation and missile maintenance operations.
- Available for use by other government/commercial maintenance operations (e.g. Customs and Border Protection (CBP), Federal Bureau of Investigation (FBI), U.S. Coast Guard (USCG), commercial firefighting aircraft, etc.).
NOTE: Tools are only to be used by trained professionals with adequate aviation or industrial experience and in accordance with the safety guidelines.
Quick Skive Removal Tools
- Glass-infused thermoplastic blades withstand heat gun temperatures
- Ergonomic handles increase productivity, reduce maintenance technician physical stress, and mitigates injury
- Performance results in labor and maintenance induced damage cost avoidance/saving and prevents rework from damaged surfaces.
The Quick Skive kit is a definite must-have for the toolroom, shop, and aircraft hangar, as its utility and potential uses within the aviation industry are unlimited. The variety of Quick Skive tools allows for flexibility of your job needs. Ultimately, this kit will save both time and money.
COL Robert Spano,
USA (RET), Former Commander,
1106th AVCRAD
Skive Tool Pricing
|
Customer |
Part # |
Part Description |
Quantity Pricing |
|
|---|---|---|---|---|
|
|
|
|
1-9 |
10+ |
|
Commercial |
08832A01 |
Quick Skive Blade Sharpening System |
$2,983.05 |
$2,814.20 |
|
|
|
|
1-9 |
10+ |
|
Government |
08832A01 |
Quick Skive Blade Sharpening System |
$2,841.00 |
$2,680.19 |
|
|
|
|
1-9 |
10+ |
|
Commercial |
08567A01 |
Quick Skive Pneumatic Removal Tool |
$1,195.12 |
$1,127.47 |
|
|
|
|
1-9 |
10+ |
|
Government |
08567A01 |
Quick Skive Pneumatic Removal Tool |
$1,138.21 |
$1,073.78 |
|
|
|
|
1-9 |
10+ |
|
Commercial |
08470A03 |
Quick Skive Deluxe Kit w/Waterproof Case |
$1,653.75 |
$1,560.14 |
|
Commercial |
08470A05 |
Quick Skive Deluxe Kit w/Waterproof Rugged Case |
$1,575.00 |
$1,485.85 |
|
|
|
|
1-9 |
10+ |
|
Government |
08470A03 |
Quick Skive Deluxe Kit w/Waterproof Case |
$1,575.00 |
$1,485.85 |
|
Government |
08470A05 |
Quick Skive Deluxe Kit w/Waterproof Rugged Case |
$1,500.00 |
$1,415.09 |
|
|
|
|
1-9 |
10+ |
|
Commercial |
08376A01 |
Quick Skive Handle |
$204.75 |
$194.51 |
|
|
|
|
1-9 |
10+ |
|
Government |
08376A01 |
Quick Skive Handle |
$195.00 |
$185.25 |
|
|
|
|
1-9 |
10+ |
|
Commercial |
08824A02 |
Quick Skive Impact Tool |
$315.00 |
$299.25 |
|
|
|
|
1-9 |
10+ |
|
Government |
08824A02 |
Quick Skive Impact Tool |
$300.00 |
$285.00 |
|
Part # |
Part Description |
Quantity Pricing |
|||
|---|---|---|---|---|---|
|
|
|
5-49 |
50-99 |
100-149 |
150+ |
|
09108H01 |
Quick Skive Blade Holder |
$46.00 |
$43.70 |
$41.52 |
$39.44 |
|
05M31.04 |
Replacement Belt Sharpener |
$32.07 |
$32.07 |
$32.07 |
$32.07 |
|
|
|
5-49 |
50-99 |
100-149 |
150+ |
|
08463H01 |
Single Sided Peek Blade 1.250 |
$20.43 |
$19.39 |
$18.38 |
$17.37 |
|
08463H02 |
Single Sided Peek Blade .750 |
$20.43 |
$19.39 |
$18.38 |
$17.37 |
|
|
|
5-49 |
50-99 |
100-149 |
150+ |
|
08464H01 |
Assymetrical Ultem Blade Full |
$20.43 |
$19.39 |
$18.38 |
$17.37 |
|
08464H02 |
Assymetrical Ultem Blade 2.30 |
$20.43 |
$19.39 |
$18.38 |
$17.37 |
|
08464H03 |
Assymetrical Ultem Blade 2.00 |
$20.43 |
$19.39 |
$18.38 |
$17.37 |
|
08464H04 |
Assymetrical Ultem Blade 1.70 |
$20.43 |
$19.39 |
$18.38 |
$17.37 |
|
08464H05 |
Assymetrical Ultem Blade 1.40 |
$20.43 |
$19.39 |
$18.38 |
$17.37 |
|
08464H06 |
Assymetrical Ultem Blade 1.20 |
$20.43 |
$19.39 |
$18.38 |
$17.37 |
|
|
|
10-99 |
100-199 |
200-299 |
300+ |
|
05M30.22 |
8" Aluminum Oxide Disc, 320x |
$7.87 |
$7.57 |
$7.26 |
$6.96 |
|
08978H03 |
Hex Gap Blade (100) |
$9.94 |
$9.45 |
$8.95 |
$8.46 |
|
08978H04 |
Hex Gap Blade (120) |
$9.94 |
$9.45 |
$8.95 |
$8.46 |
CALL OR EMAIL:
ROBERT HILL
PRODUCT BUSINESS DEVELOPMENT
Phone: 814-269-6848
Email: quickskivetools@evc.ctc.com
Quick Skive Removal Tools
- Glass-infused thermoplastic blades withstand heat gun temperatures
- Ergonomic handles increase productivity, reduce maintenance technician physical stress, and mitigates injury
- Performance results in labor and maintenance induced damage cost avoidance/saving and prevents rework from damaged surfaces.